Nissan Rogue Service Manual: DTC/circuit diagnosis

Calibration of decel G sensor

Description CAUTION: Always perform the decel G sensor calibration before driving when the following operation is performed. NOTE: Yaw rate/side/decel G sensor calibration is performed when pe ...

C1101, C1102, C1103, C1104 wheel sensor

DTC Logic DTC DETECTION LOGIC DTC Display Item Malfunction detected condition Possible causes C1101 RR RH SENSOR-1 When power supply voltage of rear wheel sen ...

Other materials:

Low tire pressure warning lamp
Component Function Check 1.CHECK THE ILLUMINATION OF THE LOW TIRE PRESSURE WARNING LAMP Check that the low tire pressure warning lamp is turned OFF after illuminating for approximately 1 second, when the ignition switch is turned ON. Is the inspection result normal? YES >> Inspection ...

Car phone or CB radio
When installing a CB, ham radio or car phone in your vehicle, be sure to observe the following precautions; otherwise, the new equipment may adversely affect the engine control system and other electronic parts. WARNING  A cellular phone should not be used for any purpose wh ...

DTC/circuit diagnosis
U1000 CAN COMM CIRCUIT Description CAN (Controller Area Network) is a serial communication system for real time application. It is an on-vehicle multiplex communication system with high data communication speed and excellent error detection ability. Many electronic control units are equipp ...