Nissan Rogue Service Manual: Preparation
Special service tools
The actual shape of the tools may differ from those illustrated here.
|
Tool number (TechMate No.) Tool name |
Description | |
| — (J-48891) Spark plug socket |  |
Removing and installing spark plug |
| KV10111100 (J-37228) Seal cutter |  |
Removing oil pan and timing chain case |
| KV10112100 (BT-8653-A) Torque angle meter |  |
Tightening bolts for bearing cap, cylinder head, etc. |
Commercial service tools
|
Tool number (TechMate No.) Tool name |
Description |
|
| Pulley puller |
|
Removing crankshaft pulley |
| Piston ring compresso |
|
Installing piston assembly into cylinder bore |
| Pulley holder |
|
Crankshaft pulley removing and installing |
| Valve seat cutter set |
|
Finishing valve seat dimensions |
| Socket |
|
Removing and installing flywheel Size: T55 |
| Piston ring expander |
|
Removing and installing piston ring |
| Valve guide drift |
|
Removing and installing valve guide
Intake & Exhaust: a: 9.5 mm (0.374 in) dia. b: 5.5 mm (0.217 in) dia. |
| Valve guide reamer |
|
Intake & Exhaust: |
| Anti-seize lubricant i.e.: (PermatexTM 133AR or equivalent meeting MIL specification MIL-A-907) |
|
Lubricating oxygen sensor thread cleaning tool when reconditioning exhaust system threads |
| Manual lift table caddy |
|
Removing and installing engine |
| KV10107902 (J-38959) Valve oil seal puller with adapter (1) |
|
Removing valve oil seal |
| KV10115600 (J-38958) Valve oil seal drift |
|
Installing valve oil seal Use side A. Unit: mm (in) |
| Tube presser |
|
Pressing the tube of liquid gasket |
| Exhaust gas sensor wrench |
|
Removing exhaust gas sensor |
| KV10116200 (J-26336-A) Valve spring compressor 1. KV10115900 (J-26336-20) Attachment 2. KV10109220 ( — ) Adapter |
|
Disassembling valve mechanism Part (1) is a component of KV10116200 (J- 26336-A), but part (2) is not. |
Symptom diagnosi
NOISE, VIBRATION, AND HARSHNESS (NVH) TROUBLESHOOTING
NVH troubleshooting - engine noise
Valve mechanism
Intake and exhaust valve
Water pump
Timing chain
Dr ...
Other materials:
C1111 pump motor
DTC Logic
DTC DETECTION LOGIC
DTC
Display Item
Malfunction detected condition
Possible causes
C1111
PUMP MOTOR
When a malfunction is detected in motor or motor relay.
Harness or connector
ABS actuator and electric unit
(control unit)
&nb ...
Diagnosis system (BCM) (without intelligent key system)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
Direct Diagnostic Mode
Description
Ecu Identification
The BCM part number is displayed.
Self Diagnostic ...
Structure and operation
Positive Crankcase Ventilation
This system returns blow-by gas to the intake manifold.
The positive crankcase ventilation (PCV) valve is provided to conduct crankcase
blow-by gas to the intake
manifold.
During partial throttle operation of the engine, the intake manifold sucks the
bl ...